Transfer Boards

Assure Safety Transfer Board

Bridge the gap between two transfer surfaces with the Assure Safety Transfer Board. Ideal for transfers between a wheelchair and a bed, toilet, chair or car seat.

Provides a smooth upper surface and a secure, high friction lower surface. Made of translucent, flexible plastic that can be bent against the wheel of the chair enabling the patient to slide over a protruding wheel or brake level.

• Max user weight: 195kg (30st)

Transfer Boards

These transfer boards are made from the highest quality, lacquered, 15mm Birch plywood. All edges are smooth and have tapered ends that allow the boards to be easily placed underneath the patient.

Our straight transfer boards are available in two sizes. Our short transfer board is ideal for use in confined spaces. The long transfer board has two handholds to facilitate positioning and movement along its length.

• Max user weight: 190kg (30st)

Quintal ET Transfer Board

• Max user weight: 100kg (16st)

Quintal Banana Board

The Quintal Banana Board has been used in the manual handling of patients for many years. Its boomerang shape allows side to side transfers in both unassisted and assisted seated transfers.

The Quintal Banana Board is NOT designed for lifting but is designed to be used for seated patient transfers across gaps no wider than the inside of the anti-slip pads. The boards have a single hand hold to assist with both positioning and transport; they provide low friction movement and offer independence in individual use.

• Max user weight: 120kg (19st)

Q2 Mobility Board

The Q2 Mobility Board is a truly universal transfer board. Its unique curved shape and maximum working load of 285kg enable it to be used in virtually all applications with 99.99% of the population.

Ideal for use in both assisted and non-assisted transfers, it is also ideal for use in face-to-face transfers within confined areas. The inset anti-slip pads, on the underside, prevent pad detachment and afford maximum grip on the two transfer surfaces.

It is lightweight and can easily be transported via the in built handles or with the aid of the optional carry strap. It is also easily wiped clean, using either household disinfectants or alcohol-based solutions.

• Max user weight: 285kg (45st)

Carry strap for Q2 Mobility Board

Q2 GlideFin

The Q2 GlideFin is an ultra low friction glide sheet material fin that is designed to provide a smooth, extremely easy sliding movement across a Q2 Mobility board during transfer. It can be attached and removed from the Q2 Mobility Board in seconds and is non permanently fixed to the board using an elasticated non slip material.

Affixing the ergonomically designed fin to the Q2 transfer board enhances the smoothness of a curved transfer and, unlike using an unattached separate glide sheet with a transfer board, the attached Q2 fin reduces the risk of patient injury.

The Q2 GlideFin is particularly useful when the patients bare skin is exposed as this usually makes movement across a transfer board impossible. However, with a Q2 GlideFin attached to the Q2 board the patient can be safely and easily transferred even with bare skin exposed.

The Q2 GlideFin is made from a Patient Specific glide sheet material and is cost effective to replace.